Unable to Upgrade from v2.5.1-beta Firmware (Snowbird unit)

BETA
5

Hey Tim, it sounds like the issue here has to do with bugs in that early beta firmware. Here’s how you can move forward:

Do a “rescue reset”, which will bring the firmware on your unit back to the factory default:

  1. Remote USB cable.
  2. Hold down the reset button with a pin.
  3. Plug in the USB cable whilst continuing to hold the reset button.
  4. Wait 10 seconds.
  5. Release the pin.

Your unit should now be on v1.109.5 firmware (factory default for the BD… series).

Now you can set up in the V2 Bond Home app.

1 Like