# Triggering Bond commands from Lutron QSX?

**URL:** <https://forum.bondhome.io/t/triggering-bond-commands-from-lutron-qsx/5749>\
**Category:** Integrations\
**Created:** [October 24, 2025, 10:51pm UTC](https://forum.bondhome.io/t/triggering-bond-commands-from-lutron-qsx/5749 "2025-10-24T22:51:41Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jay80424](https://avatars.discourse-cdn.com/v4/letter/j/9dc877/32.png) [@Jay80424](https://forum.bondhome.io/u/Jay80424)\
**Post date:** [October 24, 2025, 10:51pm UTC](https://forum.bondhome.io/t/triggering-bond-commands-from-lutron-qsx/5749/1 "2025-10-24T22:51:41Z")

</div>

Hi there,

Trying to see if this is possible.

We have a customer who has an existing Lutron QSX System. We are looking to install a outdoor shade for them, that communicates via a Bond Bridge Pro. Ideally, we would like to have a Lutron buttonpress issue a command to the Bond, to tell the shade to raise or lower. In the Lutron QSX software, I can issue a Ascii, or hex command via telnet.

Has anyone done this with success, and if so, how would I find the commands to spit out?

Thanks in advance.

Jay

---

<div class="post-metadata">

**Author:** ![residualimages](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/residualimages/32/74_2.png) [@residualimages](https://forum.bondhome.io/u/residualimages)\
**Post date:** [October 24, 2025, 11:41pm UTC](https://forum.bondhome.io/t/triggering-bond-commands-from-lutron-qsx/5749/2 "2025-10-24T23:41:21Z")

</div>

What about the QSX controller listening for the button presses and just sending an IP based [API command](https://docs-local.appbond.com) to the Bond controller?

---

<div class="post-metadata">

**Author:** ![Jay80424](https://avatars.discourse-cdn.com/v4/letter/j/9dc877/32.png) [@Jay80424](https://forum.bondhome.io/u/Jay80424)\
**Post date:** [October 24, 2025, 11:54pm UTC](https://forum.bondhome.io/t/triggering-bond-commands-from-lutron-qsx/5749/3 "2025-10-24T23:54:17Z")

</div>

Thanks, its kind of the opposite, in that the QSX will send a command TO the bond,

But I think I may have found what I need, here:

[Bond Hex Codes for Third-Party Control Systems (BETA) – BOND Home](https://olibra.zendesk.com/hc/en-us/articles/39306587020699-Bond-Hex-Codes-for-Third-Party-Control-Systems-BETA#:~:text=We%20are%20pleased%20to%20share,into%20the%20Lutron%20Designer%20software.)

---

<div class="post-metadata">

**Author:** ![residualimages](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/residualimages/32/74_2.png) [@residualimages](https://forum.bondhome.io/u/residualimages)\
**Post date:** [October 26, 2025, 3:51am UTC](https://forum.bondhome.io/t/triggering-bond-commands-from-lutron-qsx/5749/4 "2025-10-26T03:51:31Z")

</div>

Sweet! I hadn’t seen that. Thanks for linking!

---

<div class="post-metadata">

**Author:** ![Jay80424](https://avatars.discourse-cdn.com/v4/letter/j/9dc877/32.png) [@Jay80424](https://forum.bondhome.io/u/Jay80424)\
**Post date:** [April 17, 2026, 4:29pm UTC](https://forum.bondhome.io/t/triggering-bond-commands-from-lutron-qsx/5749/5 "2026-04-17T16:29:56Z")

</div>

Circling back around to this on another project. Using a Screen Innovations Kaos Outdoor shade. Single shade commands from the Hex editor work, but not group commands. Anyone have any thoughts on how to make Group commands work?