# Support for Hunter Overton 72 — only comes with a "remote-like" wall control **URL:** \ **Category:** Fans\ **Created:** [June 13, 2021, 3:10am UTC](https://forum.bondhome.io/t/support-for-hunter-overton-72-only-comes-with-a-remote-like-wall-control/2526 "2021-06-13T03:10:12Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![residualimages](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/residualimages/32/74_2.png) [@residualimages](https://forum.bondhome.io/u/residualimages)\ **Post date:** [June 13, 2021, 1:24pm UTC](https://forum.bondhome.io/t/support-for-hunter-overton-72-only-comes-with-a-remote-like-wall-control/2526/2 "2021-06-13T13:24:29Z")
The SBB devices are ceiling fans that come with Smart by Bond receivers and don’t use a Bond Bridge. With a Bond Bridge, you can indeed replicate the RF functions of this wall controller. The (potential) issue becomes the Bond Bridge won’t know if/when you’ve touched the Hunter wall controller, so the Bond Bridge’s assumptions and the real world state of the fan will likely drift apart. See [this thread](https://forum.bondhome.io/t/is-2-way-communication-possible/1990) for someone that kept the original receiver in the fan, replicated the original wall control commands in Bond Bridge, and then changed out the wall control for a Z-Wave controller that talked to the Bridge and had the Bridge issue commands to the fan’s receiver. --- _[View the full topic](https://forum.bondhome.io/t/support-for-hunter-overton-72-only-comes-with-a-remote-like-wall-control/2526)._