# SSIS after setup?

**URL:** <https://forum.bondhome.io/t/ssis-after-setup/2665>\
**Category:** Uncategorized\
**Created:** [August 14, 2021, 1:25pm UTC](https://forum.bondhome.io/t/ssis-after-setup/2665 "2021-08-14T13:25:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rgi1998](https://avatars.discourse-cdn.com/v4/letter/r/c2a13f/32.png) [@rgi1998](https://forum.bondhome.io/u/rgi1998)\
**Post date:** [August 14, 2021, 1:25pm UTC](https://forum.bondhome.io/t/ssis-after-setup/2665/1 "2021-08-14T13:25:13Z")

</div>

Does the Bond BD1000 need to broadcast its SSIS after setup? If so, can you adjust it SSID CH?  
Thx!

---

<div class="post-metadata">

**Author:** ![merck](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/merck/32/1238_2.png) [@merck](https://forum.bondhome.io/u/merck)\
**Post date:** [August 18, 2021, 5:16pm UTC](https://forum.bondhome.io/t/ssis-after-setup/2665/2 "2021-08-18T17:16:29Z")

</div>

What is “SSIS”? Do you mean “SSID”?

And, may I ask, why do you care?’

I will guess that you’re concerned about interference with other 2.4 GHz systems. I will note that we had an issue on Bond Bridge’s with serial number starting ZZ on firmware _before_ `v2.20.11` where they would use 40 MHz bandwidth and random channel (1,2,3,…,11) for their Config AP. — In `v2.20.11` we fixed this to 20 MHz bandwith and only channels 1, 6, or 11. This resulted in less noise and potential interference with other 2.4 GHz systems.