# Smart by Bond reset

**URL:** <https://forum.bondhome.io/t/smart-by-bond-reset/1573>\
**Category:** Uncategorized\
**Created:** [June 17, 2020, 9:32pm UTC](https://forum.bondhome.io/t/smart-by-bond-reset/1573 "2020-06-17T21:32:47Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![dinostop](https://avatars.discourse-cdn.com/v4/letter/d/f1d935/32.png) [@dinostop](https://forum.bondhome.io/u/dinostop)\
**Post date:** [June 17, 2020, 9:32pm UTC](https://forum.bondhome.io/t/smart-by-bond-reset/1573/1 "2020-06-17T21:32:47Z")

</div>

I have a ceiling fan module that connects to Bond. How do I reset this ceiling fan module.

---

<div class="post-metadata">

**Author:** ![residualimages](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/residualimages/32/74_2.png) [@residualimages](https://forum.bondhome.io/u/residualimages)\
**Post date:** [June 18, 2020, 7:37pm UTC](https://forum.bondhome.io/t/smart-by-bond-reset/1573/2 "2020-06-18T19:37:38Z")

</div>

There is an old rescue reset from early batches that I assume will still work.  
WARNING: this is a full factory reset.

[See here](https://forum.bondhome.io/t/solved-v2-failed-during-update-bricked/441/5)

---

<div class="post-metadata">

**Author:** ![merck](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/merck/32/1238_2.png) [@merck](https://forum.bondhome.io/u/merck)\
**Post date:** [June 19, 2020, 12:34am UTC](https://forum.bondhome.io/t/smart-by-bond-reset/1573/3 "2020-06-19T00:34:07Z")

</div>

Thanks for jumping in, Matt.

Really, this is a good question for our support team, but I’ll give an answer here.

Brian, if you haven’t already used the nuclear option (“rescue reset”), here’s two other alternatives:

To just cause the Bond Config AP to re-appear, hold down the Power button (or “Zero” button) for 10 seconds. Check your Wi-Fi list on your phone settings.

To perform a normal **factory reset** , that wipes all data including account info, Wi-Fi password, except remote pairing info, do a “factory reset”. Same instructions as Matt shared but use the Speed 1 button (or Timer button if you have the HomeDepot aftermarket kit, since it has no separate Speed 1 button). – The factory reset doesn’t change the fw version.

The **rescue reset** (Speed 3 or Breeze button with the aforementioned procedure) will also revert the firmware version to the factory original, and cause the remote to come unpaired. Not usually needed, and a bit of a PitA to recover from with the required re-pair, so that’s why we usually stick to Factory Reset.

Live Long and Prosper!

---

<div class="post-metadata">

**Author:** ![residualimages](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/residualimages/32/74_2.png) [@residualimages](https://forum.bondhome.io/u/residualimages)\
**Post date:** [June 19, 2020, 12:35am UTC](https://forum.bondhome.io/t/smart-by-bond-reset/1573/4 "2020-06-19T00:35:24Z")

</div>

Thank you, @merck! Was trying to find the less drastic versions but couldn’t lay my hands on them.