# RF door sensors status/ state (Open/ closed

**URL:** <https://forum.bondhome.io/t/rf-door-sensors-status-state-open-closed/2177>\
**Category:** Integrations\
**Created:** [January 16, 2021, 7:48am UTC](https://forum.bondhome.io/t/rf-door-sensors-status-state-open-closed/2177 "2021-01-16T07:48:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![user1](https://avatars.discourse-cdn.com/v4/letter/u/5daacb/32.png) [@user1](https://forum.bondhome.io/u/user1)\
**Post date:** [January 16, 2021, 7:48am UTC](https://forum.bondhome.io/t/rf-door-sensors-status-state-open-closed/2177/1 "2021-01-16T07:48:27Z")

</div>

Hello  
I have RF contact door sensors, bond is able to pick the signals. But I’m not able see the state of door sensors with bridge (open/ closed). I wanted to use this with Home Assistant to check the status of the door(s). Would someone be kind to guide me with this issue.  
thank you in advance

---

<div class="post-metadata">

**Author:** ![residualimages](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/residualimages/32/74_2.png) [@residualimages](https://forum.bondhome.io/u/residualimages)\
**Post date:** [January 16, 2021, 9:24am UTC](https://forum.bondhome.io/t/rf-door-sensors-status-state-open-closed/2177/2 "2021-01-16T09:24:42Z")

</div>

Bond is not an RF scanner / listener in normal mode (as in, whenever you are not actively scanning to add a device).  
It is meant to issue RF / IR commands.