# \[Request\] Home Decorators (Home Depot) Fans with FCC ID: 2ABUP-FT1212R **URL:** \ **Category:** Devices\ **Created:** [July 1, 2022, 4:02pm UTC](https://forum.bondhome.io/t/request-home-decorators-home-depot-fans-with-fcc-id-2abup-ft1212r/3342 "2022-07-01T16:02:34Z")\ **Posts on this page:** 1\ **Showing post:** 8
**Author:** ![residualimages](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/residualimages/32/74_2.png) [@residualimages](https://forum.bondhome.io/u/residualimages)\ **Post date:** [August 1, 2023, 12:55pm UTC](https://forum.bondhome.io/t/request-home-decorators-home-depot-fans-with-fcc-id-2abup-ft1212r/3342/8 "2023-08-01T12:55:44Z")
> [@Jon](#): > > It’s almost like the Bond is sending the toggle command twice Not that it’s very easy, and I’m not certain this would lead to success, but you COULD go into the command line and edit ([PATCH](http://docs-local.appbond.com/#tag/Device-Command-Signal/paths/~1v2~1devices~1%7Bdevice_id%7D~1commands~1%7Bcommand_id%7D~1signal/patch)) the signal to be a shorter version of any pattern you can find in the signal the Bridge “heard” for a single tap. Or [mess with the Reps](https://forum.bondhome.io/t/need-to-hold-repeat-rf-signal-for-a-few-seconds/1059) bit (unlike most of that thread, you’d likely want fewer rather than more, if yours is not already at 1). Edit: just realized that’s what you and @Davideos were discussing in [Lag when controlling device](https://forum.bondhome.io/t/lag-when-controlling-device/2824). 😄 --- _[View the full topic](https://forum.bondhome.io/t/request-home-decorators-home-depot-fans-with-fcc-id-2abup-ft1212r/3342)._