# Knowing blinds device/motor brand after setup

**URL:** <https://forum.bondhome.io/t/knowing-blinds-device-motor-brand-after-setup/5013>\
**Category:** Shades & Blinds\
**Created:** [October 15, 2024, 3:21am UTC](https://forum.bondhome.io/t/knowing-blinds-device-motor-brand-after-setup/5013 "2024-10-15T03:21:31Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alex](https://avatars.discourse-cdn.com/v4/letter/a/db5fbb/32.png) [@Alex](https://forum.bondhome.io/u/Alex)\
**Post date:** [October 15, 2024, 3:21am UTC](https://forum.bondhome.io/t/knowing-blinds-device-motor-brand-after-setup/5013/1 "2024-10-15T03:21:31Z")

</div>

So we had one outdoor blind/screen installed few years ago and although I didn’t know the motor brand I managed to set it up with Bond by using one of the profiles/brands offered in the app. It was a bit of trial and error but I found a compatible profile (the image of the remote helped) and all works good.

Today we had another three blinds installed, looking the same as the old one, installed by the same company, with a bit different looking remote but same specs when compared with the old remote.

My issue is that I can’t remember which profile I used for the old blind. And when I go in the setting of the old blind it’s not listed anywhere which profile/brand it’s using (e.g. Somfy or Dooya or Acmeda etc.).

Is there any way to find out which profile/brand is the currently set-up blind using or am I doomed, when setting-up the new ones, to going through all the profiles again until I find the one that works?

Thank you.

---

<div class="post-metadata">

**Author:** ![merck](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/merck/32/1238_2.png) [@merck](https://forum.bondhome.io/u/merck)\
**Post date:** [October 15, 2024, 10:58am UTC](https://forum.bondhome.io/t/knowing-blinds-device-motor-brand-after-setup/5013/2 "2024-10-15T10:58:49Z")

</div>

What is listed as the “template”？of the existing device?

---

<div class="post-metadata">

**Author:** ![Alex](https://avatars.discourse-cdn.com/v4/letter/a/db5fbb/32.png) [@Alex](https://forum.bondhome.io/u/Alex)\
**Post date:** [October 15, 2024, 12:22pm UTC](https://forum.bondhome.io/t/knowing-blinds-device-motor-brand-after-setup/5013/3 "2024-10-15T12:22:00Z")

</div>

Hi,

It’s RMS35.

Thanks

---

<div class="post-metadata">

**Author:** ![merck](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/merck/32/1238_2.png) [@merck](https://forum.bondhome.io/u/merck)\
**Post date:** [October 15, 2024, 1:14pm UTC](https://forum.bondhome.io/t/knowing-blinds-device-motor-brand-after-setup/5013/4 "2024-10-15T13:14:41Z")

</div>

Thanks. That is either Dooya Bidirectional, Rollease Automate, AMP, or Motion Blinds.

---

<div class="post-metadata">

**Author:** ![Alex](https://avatars.discourse-cdn.com/v4/letter/a/db5fbb/32.png) [@Alex](https://forum.bondhome.io/u/Alex)\
**Post date:** [October 17, 2024, 11:36pm UTC](https://forum.bondhome.io/t/knowing-blinds-device-motor-brand-after-setup/5013/5 "2024-10-17T23:36:13Z")

</div>

Thank for that, it was Dooya Bidirectional.