# Hubitat, Bond and Hunter Fan problem

**URL:** <https://forum.bondhome.io/t/hubitat-bond-and-hunter-fan-problem/1560>\
**Category:** Integrations\
**Created:** [June 16, 2020, 3:47am UTC](https://forum.bondhome.io/t/hubitat-bond-and-hunter-fan-problem/1560 "2020-06-16T03:47:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![fernandoradi](https://avatars.discourse-cdn.com/v4/letter/f/ecd19e/32.png) [@fernandoradi](https://forum.bondhome.io/u/fernandoradi)\
**Post date:** [June 16, 2020, 3:47am UTC](https://forum.bondhome.io/t/hubitat-bond-and-hunter-fan-problem/1560/1 "2020-06-16T03:47:11Z")

</div>

Hi guys,

dman2306 from the Hubitat community was helping me to solve an issue and he mentioned it might be Bond related.

I have 3 Hunter Fans ([https://www.hunterfan.com/products/ceiling-fans-symphony-with-led-light-54-inch-fam720](https://www.hunterfan.com/products/ceiling-fans-symphony-with-led-light-54-inch-fam720)) and all are working fine using the Bond app. I connected them to Hubitat with dman2306’s app but I have some issues with the fan’s speeds.

dman2306 mentioned the fans supports 6 speeds and HE only supports 5 so it has to map between the two, so high = 6, medium-high = 5, medium = 3, medium-low = 2, low = 1 which seems like exactly what it is doing and is also sending the right values to the API based on the logs:

 ![image](https://us1.discourse-cdn.com/flex019/uploads/bond1/original/1X/e846208175d10bd2af688363088c668017f08b82.png)

The problem is how the fans behave in real life:  
When I select “low=1”, the fan’s speed changes to low which is good.  
But when I select any of the other ones (medium-low=2 or medium=3 or medium-high=5 or high=6) the fan’s speed are always on high.

Any help would be appreciated.

Thanks,

---

<div class="post-metadata">

**Author:** ![jacob](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/jacob/32/312_2.png) [@jacob](https://forum.bondhome.io/u/jacob)\
**Post date:** [June 17, 2020, 6:04pm UTC](https://forum.bondhome.io/t/hubitat-bond-and-hunter-fan-problem/1560/2 "2020-06-17T18:04:01Z")

</div>

Yeah, definitely seems closely related to your SmartThings issue. If you’d like me to take a closer look at what’s happening, you can PM me your Bond’s serial.