# Help with Broadlink compatible Shades **URL:** \ **Category:** Devices\ **Created:** [April 26, 2020, 3:40pm UTC](https://forum.bondhome.io/t/help-with-broadlink-compatible-shades/1446 "2020-04-26T15:40:13Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Charleston6](https://avatars.discourse-cdn.com/v4/letter/c/da6949/32.png) [@Charleston6](https://forum.bondhome.io/u/Charleston6)\ **Post date:** [April 26, 2020, 3:40pm UTC](https://forum.bondhome.io/t/help-with-broadlink-compatible-shades/1446/1 "2020-04-26T15:40:14Z")
I am trying to connect Bond to set of existing shades. The Shades work today with the Broadlink RM Pro Universal Remote, but I would like to standardize on Bond. I have tried to add to Bond both the standard method and advanced method. When I add the standard method, it successfully turns green but the shades don’t work, interestingly the RF Frequency reports 433.66 when going through this process. I then go to the Advanced process. I plug in the information, including the RF on the remote which is 433.92 . That doesn’t even make the ring green. To confirm, the remote does successfully work on the Shades. I would appreciate any help. Thank you ---
**Author:** ![merck](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/merck/32/1238_2.png) [@merck](https://forum.bondhome.io/u/merck)\ **Post date:** [April 27, 2020, 2:19pm UTC](https://forum.bondhome.io/t/help-with-broadlink-compatible-shades/1446/2 "2020-04-27T14:19:41Z")
Can you share some more info about your shades so we can better assist? - photo of front & back of remote control - FCC ID from back of remote control > [@Charleston6](#): > > interestingly the RF Frequency reports 433.66 It is common that the actual transmit frequency of remotes differs slightly from the FCC filing, due to wide tolerances in frequency-determining components. Bond Bridge attempts to find the true centre frequency.