# {FAN-AUR-C2BL} Stateful remote fan request
**URL:** https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294
**Category:** Fans
**Created:** [February 12, 2025, 2:11pm UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294 "2025-02-12T14:11:40Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@rossbaraz](https://forum.bondhome.io/u/rossbaraz)
#### Post date: [February 12, 2025, 2:11pm UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/1 "2025-02-12T14:11:40Z")
I recently bought a fan for the office “Artika Austin 23” LED Fandelier" a new featured one at Costco. It’s learns the signals then is unable to broadcast the correct signals for it to operate consistently.
[https://www.costco.com/artika-austin-23%22-led-fandelier.product.4000295201.html](https://www.costco.com/artika-austin-23%22-led-fandelier.product.4000295201.html)
the remote info is as follows:
FCC ID:2AUHG-FAN-SUR2
IC:21811-FANSUR
REM-ARTC-1
It has a power button toggle. A fan state with 3 speeds. A light on and off and a color temperature up & down. for /rev state. light dimmer up /down. timer 1hour or 4 hour.
I got a few commands to record but not all of them.
---
### Author:  [@stephen](https://forum.bondhome.io/u/stephen)
#### Post date: [February 17, 2025, 3:27pm UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/2 "2025-02-17T15:27:08Z")
I’d like to second this request as I almost pulled the trigger on purchasing this same fan from Costco the other day. Help off until I could verify it would work with Bond properly. Thanks @rossbaraz for putting in the request with all the details.
---
### Author:  [@tswopejr](https://forum.bondhome.io/u/tswopejr)
#### Post date: [March 12, 2025, 3:15am UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/3 "2025-03-12T03:15:28Z")
I would like to also put in a request for this fan control. My thanks also to the original poster.
---
### Author:  [@Salmanslim](https://forum.bondhome.io/u/Salmanslim)
#### Post date: [May 17, 2025, 4:08am UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/4 "2025-05-17T04:08:33Z")
I would like functionality for this fan too.
---
### Author:  [@eddyj](https://forum.bondhome.io/u/eddyj)
#### Post date: [August 14, 2025, 8:05pm UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/5 "2025-08-14T20:05:22Z")
I was just looking at this “fandelier” and came to see if it was supported. Being fairly new to Bond, can someone comment on how likely it is that this will become supported, and/or a time frame for this? I will not buy it unless there is support for it.
---
### Author:  [@Jacobruiz](https://forum.bondhome.io/u/Jacobruiz)
#### Post date: [August 25, 2025, 11:09pm UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/6 "2025-08-25T23:09:25Z")
I purchased the fan above from Costco and was not able to set up the remote as easily as some of my other fans. I opted to only get the light, timers, fan off, fan reverse, and three fan speeds connected. For the light I used the toggle bottom button. Make sure to use fan off and not fan on or toggle. With these settings I was able to use the bond bridge to control the fan. For all of the other settings (dimmer, color warmth) I decided to just maintain my remote for that since I don’t plan on changing those. Hope this helps.
---
### Author:  [@Roshandle](https://forum.bondhome.io/u/Roshandle)
#### Post date: [November 24, 2025, 1:37am UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/7 "2025-11-24T01:37:19Z")
Having the same issue, I attempted to use the toggle bottom light function as well as and the function for the fan, but nothing seems to work. I believe there might be rolling codes from another post I saw.
---
### Author:  [@Jig1056](https://forum.bondhome.io/u/Jig1056)
#### Post date: [March 15, 2026, 2:15pm UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/8 "2026-03-15T14:15:53Z")
How did you get the basics to work? I can’t even get that far. I can see that the single is recognized when I try to use any of the controls even the basic ones on off and speed controls. It simply doesn’t work. I honestly would be happy and satisfied if I was able to even get that far. Once integrated into Home Assistant, I will bring it to HomeKit to use with Siri and basic on off or set speed to one, two, or three would be perfect. I used the bond bridge with other ceiling fans, but for whatever reason this one just simply won’t work.
---
### Author:  [@merck](https://forum.bondhome.io/u/merck)
#### Post date: [March 15, 2026, 11:45pm UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/9 "2026-03-15T23:45:43Z")
Anybody who has tried to record this fan, please DM me your Bond ID. We can take a look.
---
### Author:  [@eddyj](https://forum.bondhome.io/u/eddyj)
#### Post date: [March 15, 2026, 11:59pm UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/10 "2026-03-15T23:59:41Z")
What exactly is the Bond ID?
---
### Author:  [@rossbaraz](https://forum.bondhome.io/u/rossbaraz)
#### Post date: [March 16, 2026, 12:49am UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/11 "2026-03-16T00:49:59Z")
Forgive my ignorance I’d be happy to but how do you DM on this platform…. I can only see reply?
---
### Author:  [@KMDonlon](https://forum.bondhome.io/u/KMDonlon)
#### Post date: [March 16, 2026, 3:33am UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/12 "2026-03-16T03:33:08Z")
Click on Merck’s icon, then click the message icon to direct message him
---
### Author:  [@rossbaraz](https://forum.bondhome.io/u/rossbaraz)
#### Post date: [March 16, 2026, 4:00am UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/13 "2026-03-16T04:00:12Z")
Maybe I’m not at the correct level. i’ve also clicked on his profile and I still don’t see any message option.
---
### Author:  [@rossbaraz](https://forum.bondhome.io/u/rossbaraz)
#### Post date: [March 16, 2026, 4:00am UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/14 "2026-03-16T04:00:45Z")
---
### Author:  [@merck](https://forum.bondhome.io/u/merck)
#### Post date: [March 16, 2026, 2:02pm UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/15 "2026-03-16T14:02:50Z")
You are also welcome to share the Bond ID right here in-thread. It’s the serial number from the bottom of your Bond Bridge, it should start with `Z`. — I don’t see any privacy issue there. Just don’t share your “token”.
---
### Author:  [@merck](https://forum.bondhome.io/u/merck)
#### Post date: [March 16, 2026, 2:03pm UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/16 "2026-03-16T14:03:46Z")
Ooo seems you did not have enuf “trust level”. I bumped you, should be able to DM now.
---
### Author:  [@eddyj](https://forum.bondhome.io/u/eddyj)
#### Post date: [March 16, 2026, 2:15pm UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/17 "2026-03-16T14:15:23Z")
I also cannot DM, but I can post the ID here then.
---
### Author:  [@rossbaraz](https://forum.bondhome.io/u/rossbaraz)
#### Post date: [March 23, 2026, 3:47pm UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/18 "2026-03-23T15:47:31Z")
DM sent did you get it ok?
---
### Author:  [@RCSpam](https://forum.bondhome.io/u/RCSpam)
#### Post date: [April 5, 2026, 10:07am UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/19 "2026-04-05T10:07:26Z")
Also struggling with this. Bought 3 artikas from Costco and have had each working at one point. Happy to share whatever is needed to assist.
---
### Author:  [@joswald](https://forum.bondhome.io/u/joswald)
#### Post date: [May 20, 2026, 6:29pm UTC](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294/20 "2026-05-20T18:29:44Z")
Curious if there has been any progress on this fan? I have one that was “kind of” working. I tried to re-record everything and now it’s “mostly not” working.
[Next page](https://forum.bondhome.io/t/fan-aur-c2bl-stateful-remote-fan-request/5294.md?page=2)