# Enbrighten Landscape Lights

**URL:** <https://forum.bondhome.io/t/enbrighten-landscape-lights/2512>\
**Category:** Uncategorized\
**Created:** [June 7, 2021, 9:12pm UTC](https://forum.bondhome.io/t/enbrighten-landscape-lights/2512 "2021-06-07T21:12:02Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wishin4warm](https://avatars.discourse-cdn.com/v4/letter/w/3bc359/32.png) [@Wishin4warm](https://forum.bondhome.io/u/Wishin4warm)\
**Post date:** [June 7, 2021, 9:12pm UTC](https://forum.bondhome.io/t/enbrighten-landscape-lights/2512/1 "2021-06-07T21:12:02Z")

</div>

I have a set of Enbrighten Landscape lights that come with an RF remote that I’d love to connect to bond but nothing I do makes it record the signal. Any other ideas on getting it to record the signal?

---

<div class="post-metadata">

**Author:** ![residualimages](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/residualimages/32/74_2.png) [@residualimages](https://forum.bondhome.io/u/residualimages)\
**Post date:** [June 8, 2021, 2:29pm UTC](https://forum.bondhome.io/t/enbrighten-landscape-lights/2512/2 "2021-06-08T14:29:57Z")

</div>

Does [this](https://fccid.io/QOBRGBLL612/User-Manual/User-Manual-3784041) look like the manual for the lights / remote you’re using?

If so, it is 2.4 GHz - not within the RF range of any (current) Bond hardware.  
_Official hardware level supported frequencies in Bond Bridge: ~300-500 MHz (Serials starting with ZZ support 285.5 - 505.5 MHz, older models with serials starting with A or B only support 300 - 450 MHz)_

---

<div class="post-metadata">

**Author:** ![Wishin4warm](https://avatars.discourse-cdn.com/v4/letter/w/3bc359/32.png) [@Wishin4warm](https://forum.bondhome.io/u/Wishin4warm)\
**Post date:** [June 8, 2021, 3:16pm UTC](https://forum.bondhome.io/t/enbrighten-landscape-lights/2512/3 "2021-06-08T15:16:02Z")

</div>

Well darn it that’s it. I didn’t even think to check on the range supported. Thanks for responding so quickly

---

<div class="post-metadata">

**Author:** ![residualimages](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/residualimages/32/74_2.png) [@residualimages](https://forum.bondhome.io/u/residualimages)\
**Post date:** [June 8, 2021, 4:08pm UTC](https://forum.bondhome.io/t/enbrighten-landscape-lights/2512/4 "2021-06-08T16:08:58Z")

</div>

I learned the hard way with one of my RF devices I just assumed would work - sorry to pass on this information to you as well, but at least you know now. 😔