# Confirming support and a programming question

**URL:** <https://forum.bondhome.io/t/confirming-support-and-a-programming-question/3699>\
**Category:** Devices\
**Created:** [December 21, 2022, 7:03pm UTC](https://forum.bondhome.io/t/confirming-support-and-a-programming-question/3699 "2022-12-21T19:03:13Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![larrywal](https://avatars.discourse-cdn.com/v4/letter/l/65b543/32.png) [@larrywal](https://forum.bondhome.io/u/larrywal)\
**Post date:** [December 21, 2022, 7:03pm UTC](https://forum.bondhome.io/t/confirming-support-and-a-programming-question/3699/1 "2022-12-21T19:03:13Z")

</div>

Hi all - I’ve got three outdoor shades on my patio with Somfy motors, and a Struxure Pergola with a motor for the Louvers.

1. The shades are controlled by a Somfy 74300 - France remote, which has a sticker on the back that says TELIS-4SOLIRIS-PATIO US GX420
2. The pergola is controlled by a Somfy 74300-France remote, which has a sticker on the back that says TELIS 4 RTS US PATIO GX431

FCC ID on the back of both says DWN.

Question A) Looks like these will both be supported with Bond, is that right?

Question B) I ordered my Bond - when I program it, how will I program the different zones for the shades? I assume I’ll program each zone individually, AND THEN ALSO program the “all zone” individually?