# Bridge Firmware v2.9.1 through v2.9.3 releases

**URL:** <https://forum.bondhome.io/t/bridge-firmware-v2-9-1-through-v2-9-3-releases/932>\
**Category:** BETA\
**Created:** [October 18, 2019, 7:56pm UTC](https://forum.bondhome.io/t/bridge-firmware-v2-9-1-through-v2-9-3-releases/932 "2019-10-18T19:56:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jacob](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/jacob/32/312_2.png) [@jacob](https://forum.bondhome.io/u/jacob)\
**Post date:** [October 18, 2019, 7:56pm UTC](https://forum.bondhome.io/t/bridge-firmware-v2-9-1-through-v2-9-3-releases/932/1 "2019-10-18T19:56:34Z")

</div>

Hey all, I just released firmware v2.9.3 to beta. We’ve made a few small firmware releases in the past couple weeks, here’re some release notes for these versions, rolled up together:

- Local support/fixes for the following remote “families” (the “family” is the name of the remote offered to you after you scan):

RCF84, RCF132, RCF198v2, D1 and D1x

- Fix Somfy remotes behaviors for older receivers or when setting up many remotes

If your receiver responded, but acted strange — moving a bit and stopping, for instance — this fix may resolve that. If you had several remotes and one “took over” from another after a while, this fix will almost definitely resolve that.

- Various performance fixes around syncing and scanning