# Bond with Hubitat: Somfy MY Settings

**URL:** <https://forum.bondhome.io/t/bond-with-hubitat-somfy-my-settings/3696>\
**Category:** Integrations\
**Created:** [December 17, 2022, 6:59pm UTC](https://forum.bondhome.io/t/bond-with-hubitat-somfy-my-settings/3696 "2022-12-17T18:59:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![M777](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@M777](https://forum.bondhome.io/u/M777)\
**Post date:** [December 17, 2022, 6:59pm UTC](https://forum.bondhome.io/t/bond-with-hubitat-somfy-my-settings/3696/1 "2022-12-17T18:59:28Z")

</div>

Bond Bridge (standard) has all 3 of my Somfy motored devices (1 set tilt-blinds, 1 set cellular roller blinds, and 1 full curtain) operating perfectly in Bond app, including the MY settings. I used the built-in integration in Hubitat, and it integrated well… I’m able to “see” all 3 devices, and they can Open/Close from Hubitat app. What I cannot seem to figure out is how to do the MY settings in Hubitat. I found an old thread on the Hubitat community, which seemed to say to use ‘SetPosition’ to 50%, and that would be the MY setting, but I’m not sure if I did it correctly because it’s not working. I see ‘SetPosition’ within the configuration for each device:

 ![image](https://us1.discourse-cdn.com/flex019/uploads/bond1/original/1X/29a6dcac537987888c5a1ce42ec300d0a84c186a.png)

But entering ‘50’ in the configuration doesn’t work (it won’t save with the 50 staying there). Next I tried creation of a RulesMachine rule, but the ‘SetPosition’ doesn’t work there either.

What do I need to do?

---

<div class="post-metadata">

**Author:** ![M777](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@M777](https://forum.bondhome.io/u/M777)\
**Post date:** [December 17, 2022, 7:00pm UTC](https://forum.bondhome.io/t/bond-with-hubitat-somfy-my-settings/3696/2 "2022-12-17T19:00:42Z")

</div>

> [@M777](#):
>
> Next I tried creation of a RulesMachine rule, but the ‘SetPosition’ doesn’t work there either.

Here’s where I tried to ‘SetPosition’ within the RulesMachine rule:

 ![Screenshot 2022-12-17 at 1.55.19 PM](https://us1.discourse-cdn.com/flex019/uploads/bond1/original/1X/67b063b5a2e9e4abb1c3fde0c6892328f515b8c4.jpeg)

---

<div class="post-metadata">

**Author:** ![sburke781](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.bondhome.io/sburke781/32/465_2.png) [@sburke781](https://forum.bondhome.io/u/sburke781)\
**Post date:** [December 20, 2022, 6:02am UTC](https://forum.bondhome.io/t/bond-with-hubitat-somfy-my-settings/3696/3 "2022-12-20T06:02:38Z")

</div>

The old post you would have seen would have been for the custom integration that was originally developed by Dominic. I am not sure what the arrangement was when Hubitat introduced their built-in integration, whether it was a direct copy of Dominic’s or they developed it from scratch.

I am still using the custom integration and can use the 50% position to have my awnings come to the MY position. I haven’t tested the new built-in integration provided by Hubitat.

If you haven’t done so already, I would suggest positing on the Hubitat Community forum as it will be the developers at Hubitat who will need to look into this for you.